Labs

Mic, Speaker & Screen Tester

Test headphones, left and right speakers, record a private 5-second mic check, and inspect dead screen pixels locally.

Ready to test
Speakers & Headphones Stereo L / R
L
Left Earbud / Speaker Pan -1.0 · Idle
R
Right Earbud / Speaker Pan +1.0 · Idle

Put on both earbuds or turn on your speakers, then test each channel below.

Settings Warm Chime · Default output
How It Works

How to Use Mic, Speaker & Screen Tester in 3 Steps

1

Test Left, Right, and Both Headphones

Click Left Ear, Both Stereo, Right Ear, or Auto to spot dead earbuds or swapped stereo cables.

2

Check Your Microphone With a 5-Second Clip

Switch to Microphone and click Record 5s Playback to check live volume levels and hear your voice.

3

Inspect Screen Pixels in Fullscreen

Open Screen and click Start Fullscreen Pixel Test to cycle solid RGBW frames and spot dead or stuck pixels.

Reference

Headphone Channel, Microphone Level, and Dead Pixel Check Guide

Diagnostic CheckTarget Value or SignalWhat It Confirms
Left Ear Stereo Panpan = -1.0 (440 Hz chime)Isolates audio to the left driver so you spot muted earbuds or reversed headphones.
Right Ear Stereo Panpan = +1.0 (554.37 Hz chime)Isolates audio to the right driver with zero left-channel bleed.
Both Stereo & Pink Noisepan = 0.0 (equal dual channel)Verifies center stereo balance and checks speakers or headphones for bass rattle.
Healthy Mic Speaking Range-24 dB to -6 dB (Good speaking volume)Delivers clear speech on Zoom, Google Meet, and Teams without clipping distortion.
Dead Pixel vs. Stuck PixelBlack dot on White vs. bright RGB dot on BlackDead pixels stay unlit permanently, whereas stuck sub-pixels lock on Red, Green, or Blue.
FAQ

Mic, Speaker & Screen Tester: Frequently Asked Questions

How do I test if my left and right headphones or earbuds work?

Put on both earbuds and click Left Ear, Right Ear, or Auto Left -> Right -> Both. Sound from the opposite ear means your headphones sit backward or stereo channels are swapped. Select Soft Pink Noise in Settings to check for driver rattle.

Is my 5-second microphone test recording uploaded anywhere?

No. Your browser records and plays the 5-second clip locally in RAM with Web Audio and MediaRecorder. Nothing uploads to any server, and closing the tab erases the audio. For full recordings, open the Voice Recorder.

How can I check my webcam, background noise, and audio before a Zoom or Google Meet call?

Run your headphone and 5-second voice check here, then test video framing in Online Camera. Clean noisy recordings in Background Noise Reducer, or inspect live frequencies in Audio Visualizer.

What is the difference between a dead pixel and a stuck pixel?

A dead pixel receives no power and looks like a black dot against white, red, green, and blue frames. A stuck pixel locks one sub-pixel on and glows red, green, or blue against the black screen.

Why does my microphone show Silent even after I allow browser permission?

Check any physical mute switch on your headset cable and pick the active Input device. Verify that your operating system sound settings grant microphone access to your browser.

Toolity Labs

Explore All Labs Tools

Generate QR codes, build shareable links, convert units, and run everyday browser utilities.

Copied to clipboard